UNI-T UTD2000CEX-II Series User Manual

The maximum value, minimum value, peak value,
top value, amplitude, period average value, average
value, cycle RMS, RMS, area , period area,
overshoot, preshoot, rising ,falling ,frequency,
period, rise time, fall time, pulse width, positive
pulse width, negative pulse width, burst pulse width ,
positive duty cycle ,negative duty cycle , phase,
FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, etc.
total quantity of 34 measurement parameters
Auto
Measurement
Displays 5 at the same time
Screen or cursor
Measurement
Statistics
Frequency
meter
Average value, maximum value, minimum value,
standard deviation and the number of measurements
Hardware 6 bit frequency meter
Measurement
Number
Measurement
Range
Split screen; time base can be adjusted independently
Low pass, High pass, Band pass
Mathematical Operations
Waveform
Calculation
FFT Window
Type
FFT Display
FFT Vertical
Scale
Digital Filter
Internal (20), External USB
Internal (20), External USB
External USB
Storage
Setting
Waveform
Bitmap
8-inch TFT LCD
800 horizontal ×480 vertical (RGB)
160,000,000
Auto / Short afterglow / Long afterglow / Infinity
1s, 2s, 5s, 10s, 20s, manual
Point, Vector
Display
Display type
Display Resolution
Display Color
Duration
Menu Duration
Display Type
Standard：USB-OTG, Pass/Fail interface
Optional：USB-LA Logic analyzer (UT-M09)
Waveform Genrator (UT-M11)
DMMs
Interface
Standard/
Optional
General Technical Specifications
Probe compensated signal output
3Vp-p
10Hz, 100Hz, 1kHz(default), 10kHz,100kHz
Output Voltage
Frequency
UTD2000CEX-II User Manual

UNI-T UTD2000CEX-II Series Specifications

General

Brand	UNI-T
Model	UTD2000CEX-II Series
Category	Test Equipment
Language	English