UNI-T UTD2102CEX+ User Manual

UTD2000 Series User Manual
62
Measurements
Cursor
Manual mode
Voltage difference between cursors (△V),
Time difference between cursors (△T),
Reciprocal of △T (Hz) (1/△T))
Track mode
Voltage value and time value of point of waveform.
Auto
measurement
mode
Cursor display is allowed on auto measurement mode.
Automatic
measurement
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vmid, Average, Vrms, Overshoot, Preshoot, Frequency, Period,
RiseTime, FallTime, +Width, -Width, +Duty, -Duty, Delay, FRFR, FRFF, FFFR, FFFF, FRLF, FRLR, FFLR,
FFLF
Measurement
quantity
Display 5 types of measurement at the same time.
Measurement
scope
Screen or cursor
Measurement
statistics
Average value, maximum value, minimum value and standard deviation.
Math
Math operation
+, -, ×, ÷
Window
Rectangle, Hanning、Blackman、Hamming
Vertical scale
Vrms、dBVrms
Digital filtering
Low pass, high pass, band pass, band reject
Storage
Setting
Internal: 20 groups. USB: 200 groups
Reference
waveform
Internal: 20 groups. USB: 200 groups
Data file
Internal: 20 groups. USB: 200 groups
Bitmap
USB: 200 groups, in BMP format.
Trigger frequency meter
Reading resolution
6 bits
Trigger sensitivity
≤30Vrms
Accuracy (Typical)
±51ppm (+1 character)

UNI-T UTD2102CEX+ Specifications

General

Brand	UNI-T
Model	UTD2102CEX+
Category	Test Equipment
Language	English