115
Multiple handsets
DeutschEnglish
Expanding the functionality of the telephone
Multiple handsets
Up to six handsets can be registered to the base station.
Each registered device is assigned an internal number (1 – 6) and an internal name (INT 1 –
INT 6). The number or name assigned can be changed.
If all internal numbers have already been assigned at the base station: de-register a handset
that is no longer needed
Registering the handset
A handset can be registered on up to four base stations.
On the base station
¤ Press and hold the Registration/Paging key on the base station (approx. 3 secs)
On the handset
Once registration is complete, the handset returns to idle status. The internal number of the
handset appears in the display, e. g. INT 1. If not, repeat the procedure.
Registering a handset to multiple base stations
Your handset can be registered to up to four base stations. The active base station is the base
station to which the handset was last registered. The other base stations remain saved in the list
of available base stations.
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
¤ . . . use to select Settings OK Registration OK Register
Handset OK . . . an available base station is sought . . . Enter system PIN (default setting:
0000) OK
If the handset is already registered with four bases, select the base to be replaced by
the new base.
Maximum possible number of handsets registered to the base station (all internal
numbers assigned): The handset with the highest internal number is replaced by the
new one. If this is not possible, because a conversation is being held on this handset,
for example, the message No available internal number is given. De-register a
handset that is no longer required and repeat the registration procedure
Some Gigaset bases and bases/routers from third party manufacturers might not be
fully compatible with the handset and not all functions are displayed correctly. In
such cases, use menu entry Basic Registration. This guarantees correct displays on
the handset, but can entail restrictions for some functions.
To Next Page
Loading...
Need help?
General