91
Making calls
DeutschEnglish
Dialling from the call list
The call lists ( p. 99) contain the most recent accepted, outgoing and missed calls.
Enter a dial pause when dialling
¤ Press and hold the hash key. A P is shown on the display
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Talk /
Handsfree key ( / ).
Accept a call:
• Press the Talk key or Accept
• If Auto Answer is activated: Remove the handset from the charging cradle
• Accept a call on the headset
Switch off ringtone: Silence . . . the call can be accepted for as long as it is shown on the
display
Information about the caller
The caller's phone number is displayed.
If the caller's number is saved in the local directory, the name is displayed.
¤ Delete entry OK
Delete all entries:
¤ Delete List OK
Set automatic line seizure:
¤ Automatic Redial OK . . . the dialled number is automati-
cally dialled at fixed intervals (at least every 20 secs). The handsfree
key flashes, "open listening" is activated.
The participant answers: Press the Talk key . . . the function
is terminated
The participant does not answer: The call is interrupted after
around 30 secs. The function is terminated after pressing any key
or after ten unsuccessful attempts.
¤ . . . use to select Call Lists OK . . . use to select a list OK . . .
use to select an entry Press the Talk key
The call lists can be displayed directly by pressing the display key Calls if the relevant
function has been assigned to the display key.
The Missed calls list can also be opened by pressing the Message key .
The caller's number is sent ( p. 25).
To Next Page
Loading...
Need help?
General