Handset 11
Attaching the belt clip
The handset has notches on each side for attaching the belt clip.
• Attaching the belt clip: Press the belt clip onto the back of the handset
so that the tabs on the belt clip click into place in the notches.
• Removing the belt clip: Press the centre of the belt clip firmly with your
right thumb. Push the nail of your left thumb up between the clip and
the casing. Slide the clip upwards to remove.
Professional belt clip (accessory)
Attaching the belt clip:
¤ Press the holder on the back of the handset so that the tabs click into place
in the notches .
¤ Secure the belt clip on the belt .
¤ Hook in the handset with holder into the belt clip and push it down .
Removing the belt clip:
¤ Push the handset up and unhook it from the belt clip .
Connecting the headset
¤ Remove the cover from the headset socket.
¤ Connect the headset with 3.5 mm jack to the left side of the handset .
or
Connecting the USB data cable
For data exchange between the handset and PC:
¤ Connect the USB data cable with micro-USB plug into the USB
socket at the bottom of the handset .
¤ Connect headset via Bluetooth ( p. 32)
Setting the headset volume: p. 36
Connect the handset directly to the PC, not via a
USB hub.
1
1
2
3 4
3
4 52
5
1
1
1
1
To Next Page
Loading...
Need help?
General