UBio-X Face Premium User Guide 3
UNIONCOMMUNITY Co., Ltd.
Address: 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
<Glossary>
Admin, Administrator
- A user who can enter into the terminal menu mode, he/she can register/modify/delete
terminal users and change the operating environment by changing settings.
- If there is no administrator for a terminal, anyone can change the settings. In this regard,
it is recommended to register at least one administrator.
- Caution is required with registration and operation because an administrator has the right
to change critical environmental settings of the terminal.
1:1 Authentication (1 to 1, Verification)
- A method of authenticating a fingerprint after entering a user ID or card.
- It's called 1:1 authentication because it compares only the user's fingerprints registered
on the user ID or card.
1:N Authentication (1 to N, Identification)
- It's a way to find the user with just a fingerprint.
- It is called 1:N authentication because it is a method of finding the same fingerprint as
the input fingerprint among registered fingerprints without entering a user ID or card.
Authentication level
- Depending on the face matching rate, it is displayed from 1 to 9. Authentication is
successful only if the matching rate is higher than the set level.
- The higher the authentication level, the higher the security. However, it requires a
relatively high match rate, so Authentication is vulnerable to failure.
- 1:1 Level: Authentication level used for 1:1 verification
- 1:N Level: Authentication level used for 1:N identification
Authentication Method
- This represents the various types of authentication, including Face authentication, RF
(card) authentication or a combination of these methods.
Example) Face or FP: Authenticate with face or fingerprint.
LFD (Live Finger Detection): Fake fingerprint prevention function
- It allows only actual fingerprints to be entered and prevents input of imitation
fingerprints made of rubber, paper, film, silicone, etc.
To Next Page
Loading...
Need help?
General
