Unique UGP-30E ON1 User Manual

42
The ames have
suddenly gone
out
There is a power
failure - can I still
use the cooktop
burners?
PROBLEM
Burner ame goes
out at low setting
A draft or spill has
extinguished the
ame.
Power outage in
your area.
POSSIBLE CAUSES
Low gas pressure.
Air intake holes
around burners are
obstructed.
• No action required. The
burner will detect this and
automatically re-light.
However if there has been
a large spill, we recommend
turning the burners off and
cleaning the burners and
sump area. See “Care and
Cleaning” for instructions.
• The cooktop burners can still
be used. To light them:
1.) Holding a lit match to the
ame spreader, push in on
the control knob and turn
counterclockwise to LIGHT.
2.) When the ame is
burning all the way around
the burner, you may adjust
the heat.
If the ame is blown out
during a power failure, turn
the knob immediately to
OFF, as the burner will not
automatically re-light and
gas may escape.
POSSIBLE SOLUTION
• Contact gas company.
• Remove obstruction from air
intake holes.
TROUBLESHOOTING continued
!
CAUTION
There is a power
failure - can I still
use the oven?
Power outage in
your area.
•The oven cannot be used until
power is restored.

Unique UGP-30E ON1 Specifications

General

Brand	Unique
Model	UGP-30E ON1
Category	Ranges
Language	English