40
CARE AND CLEANING continued
To avoid electrical shock or burns, turn off controls and ensure the
range and oven are cool before cleaning.
Replacing the burner parts:
When replacing the burners, make sure that the two locating pins on the
bottom of the brass ame spreader are properly aligned with the locating pin
holes on the top of the simmer ring.
Incorrect alignment will produce a potentially dangerous ame and poor
burner performance.
Replacing the oven light bulbs:
To replace either of the oven light bulbs, release the glass cover on the lamp
holder, and then replace the old bulb with a new bulb.
Burner cap
Burner cap
Ignitor
Thermocouple
Inner burner base
Outer burner head
Outer burner head
Outer burner base
Burner base cup
Outer burner base
To Next Page
Loading...
Need help?
General
