IMPORTANT !
When unpacking an amplifier which is cold, allow it to
stand for sufficient time to reach normal room temperature
before attempting to operate it. This precaution will allow
any condensation which may have formed on the electronic
parts to fully dissipate.
Keep the original carton and packing material in a safe
place. You will need it if you have to send the unit for service
or transport it for any other reason.
VALVE FITTING
Fit the valves into their corresponding sockets following the
scheme you can see on the transformers covers and the
indications on the valves themselves which ensure the correct
orientation.
When fitting (or removing) valves, use firm but gentle
pressure. Never use force !
PLACEMENT
The unit should be placed on a safe, stable surface, out of
reach of children or pets. Adequate ventilation is required
above and around the unit. Take care not to expose the unit to
high temperature or humidity.
To Next Page
Loading...
Need help?
General
