Unison Research PRELUDIO User Manual

8
In case you use the remote control, press the “Sel” button
until you reach the desired input (see remote control functions).
REMOTE CONTROL FUNCTIONS
Both volume and input selection of the amplifier can be
controlled by means of the InfraRed remote handset.
The remote control unit supplied with the Sinfonia is fully
compatible with the standard handset of the Unico series
amplifiers and the Unico CD.
IMPORTANT !
When using the wood remote control for the first time press
the learning button (marked by the Unison Research logo).
Every time you will use the standard handset, to switch
back to the wood remote control you will have to repeat
this operation.
This operation has always to be repeated after using the
standard handset to control the Sinfonia.
The remote handset is supplied with two AAA type batteries
(1.5V) which should be inserted into the handset by opening
the rear flap. Ensure that the correct polarity is respected when
fitting the batteries. Replacement batteries should be of the
same type.
SWITCHING OFF THE UNIT
After switching off the unit, wait around 5 minutes before
switching it on again. This time is necessary to allow the valves
to cool down to room temperature.

Unison Research PRELUDIO Specifications

General

Brand	Unison Research
Model	PRELUDIO
Category	Amplifier
Language	English