Unitech PA600 Programming Manual

-
2.19. Check if Scan2Key.exe program is running or not
Function Description:
Test whether Scan2Key application is running at background. (It doesn＇t mean Scan2Key is
routing scanner input to keyboard, please call S2K_IsEnabled() to check if routing function is
enable or not)
Function call:
HWND S2K_IsLoaded();
Return:
NULL: Scan2Key is not running
Non-NULL: indicates scan2key is running. It actually returns window handle for scan2key, but
it is for internal use – send messages.
2.20. Test if Scan2Key is enabled
Function Description:
Test whether Scan2Key is enabled. Scan2Key routes scanning input from scanner to keypad
buffer, so that barcode data can be input as like from keystrokes on keypad.
Function call:
BOOL S2K_IsEnabled();
Return:
TRUE = enabled.
FALSE = disable
2.21. Load/Unload Scan2Key.exe
Function Description:
Load or unload Scan2Key
Function call:
BOOL S2K_Load(BOOL load, DWORD timeout);
Parameter: (input)
load: BOOL : TRUE = load Scan2Key
FALSE = unload Scan2Key
timeout: DWORD : when unload Scan2Key, it will wait until Scan2Key has been
removed from memory or timeout specified by this parameter.
Return:
TRUE = successfully loaded.
2.22. Enable/Disable Scan2Key
Function Description:
Enable or disable Scan2Key to put scanned data to standard keyboard input buffer. Scan2Key is
enabled by default.
Function call:
BOOL S2K_Enable(BOOL enable, DWORD timeout);
Parameter: (input)
enable: BOOL : TRUE = Enable scanned data to keyboard buffer
FALSE = Disable scanned data to keyboard
timeout: DWORD : when enable or disable Scan2Key, it will wait until Scan2Key has
been removed from memory or timeout specified by this parameter.
Return:
TRUE = if successfully enabled Scan2Key, otherwise FALSE

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm