EasyManuals Logo
Home>Unitech>PDA>PA600

Unitech PA600 Programming Manual

Unitech PA600
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
-
6.1.5. Check Function Key status
Function Description:
This function is used to check if function key is enabled or not.
Function call:
BOOL GetFnKeyStatus(void)
Return code:
TRUE = Function key is enabled.
FALSE = Function key is disabled.
6.1.6. Enable/Disable Function Key
Function Description:
This function is used to enable/disable function key.
Function call:
void SetFnKeyDisable(BOOL bOff)
Parameter (Input):
TRUE = Disable function key.
FALSE = Enable function key.
6.2. Scanner Related Functions
To save power, the decoder IC is disabled when scanner is not in use. It can be
enabled through USI functions. Following functions are meaningful only if decode IC is
enabled.
6.2.1. Enable/Disable Scanner trigger key
Function Description:
This function enables/disables trigger keys.
Function call:
void EnableScannerTrigger(BOOL fOn)
Parameter (Input)
fON: BOOL: TRUE = enable trigger keys.
FALSE = disable trigger keys.
Return code:
6.2.2. Turn on/off Scan Engine
Function Description:
This function emulates trigger keys to turn scan engine on or off. It
functions even if trigger keys are disabled.
Function call:
void SetScannerOn(BOOL fON)
Parameter(Input)
fON: BOOL: TRUE = turn scan engine on.
False= turn scan engine off.
Return code: none
6.2.3. Get Trigger keys Status
Function Description:
This function returns enable/disable status of trigger keys.
Function call:
BOOL GetScannerTrigger(void)
Return code:
TRUE = trigger keys are enabled.
FALSE = trigger keys are disabled.

Table of Contents

Other manuals for Unitech PA600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unitech PA600 and is the answer not in the manual?

Unitech PA600 Specifications

System Memory IconSystem Memory
SDRAM memory64 MB
Flash ROM128 MB
Flash ROM with WWAN320 MB
Display IconDisplay
display resolution240x320 QVGA
display typeColor Transflective TFT
touch screenYes
Power IconPower
main battery3.7V 1950mAh Li-Ion Battery Pack
backup batteryOne Rechargeable Ni-MH Backup Battery
power sourceMain Battery
Operating Environment IconOperating Environment
operating temperature32ºF to 122ºF (0ºC to 50ºC)
storage temperature-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity5% ~ 95% (non-condensing)
Weight and Dimensions IconWeight and Dimensions
weight290g with Battery & Scan Engine
length149.5 mm
height26.6 mm

Related product manuals