18 19
9. Initial pairing
1. On your phone, go to your settings menu to
ensure Bluetooth
®
is on and to search for
Bluetooth enabled devices.
2. Turn your hearing aids on by
closing the battery door. Your
hearing aids will remain in
pairing mode for minutes.
3. Your phone will show a
list of found Bluetooth enabled devices.
Select your hearing aid from the list to
simultaneously pair both hearing aids. You
will hear a melody when your phone has
been successfully paired to your hearing
aids.
It is only necessary to perform the pairing
procedure once with each Bluetooth enabled
phone.
Consult your phone user guide for instructions
on pairing a Bluetooth device with your phone.
Bluetooth
®
is a registered trademark owned by the Bluetooth SIG, Inc.
and used under license by Unitron.
Connecting to your mobile phone
Aer your hearing aids have been paired to your
phone, they will automatically connect again
when your phone and hearing aids are turned
on and in range. This can take up to 2 minutes.
The connection will be maintained as long as
the phone remains ON and within a range of
up to 10 m (30 ).
To switch a call between your hearing aids and
the speaker on your mobile phone, select the
audio source you would like from your phone.
If you are not sure how to do this, consult the
instruction manual that came with your mobile
phone.
To Next Page
Loading...
Need help?
General
