40 41
Radio information of your wireless hearing aid
Antenna type Resonant loop antenna
Operation frequency 2.4 GHz – 2.48 GHz
Modulation GFSK, Pi/4 DPSK, GMSK
Radiated power < 2.5mW
Bluetooth
®
Range ~1m
Bluetooth 4.2 Dual-Mode
Proles supported HFP (Hands-free prole), A2DP
Compliance with emission and immunity standards
Emission standards EN 60601-1-2
IEC 60601-1-2
Immunity standards EN 60601-1-2
IEC 60601-1-2
18. Information and explanation of
symbols
xxxx
With the CE symbol, Sonova AG conrms that
this product – including accessories – meets the
requirements of the Medical Devices Regulation MDR
2017/745, Medical Devices Directive 93/42/EEC as well
as the Radio Equipment Directive 2014/53/EU.
The numbers aer the CE symbol correspond to the code
of certied institutions that were consulted under the
above-mentioned regulation and directives.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an applied part of Type B of EN 60601-1. The surface of
the hearing aid is specied as applied part of Type B.
Indicates the medical device manufacturer, as
dened in Medical Devices Regulation (EU) 2017/745.
Indicates the date when the medical device was
manufactured.
Indicates the Authorized representative in the
European Community. The EC REP is also the importer
to the European Union.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
these user guides.
To Next Page
Loading...
Need help?
General
