Unitron Stride B9-UP User Manual

4 5
3. Putting your hearing aids on your
ears
Your hearing aids will be color-coded with a
marking on the outside of the hearing aid:
red = right ear; blue = le ear.
1. Hold the earmold between
your thumb and index nger,
with the opening facing
toward your ear canal and
the hearing aid resting
above your ear.
2. Carefully insert the earmold
in your ear. You may need
to twist it slightly to the
back. The earmold should
t into your ear snugly
and comfortably. Gently
pull down and back on your
earlobe to help you insert the
earmold into your ear canal
more easily.
3. Place the hearing aid over the
top of your ear.
1.
2.
3.
2. Turning your hearingaids
onando
The battery door acts as an on and o switch.
1. On: Close the battery door
fully.
Note: It may take 5 seconds
before the hearing aid turns
on. Your hearing healthcare
provider can additionally
increase the start up delay if
required.
2. O: Partially open the
battery door.
3. Open: Fully open the battery
door to access and change
the battery.
Note: When turning your hearing aid on and o
while it is on the ear, grasp the top and bottom
of the device with your index nger and thumb.
Use your thumb to open and close the battery
door.
2.
1.

Unitron Stride B9-UP Specifications

General

Brand	Unitron
Model	Stride B9-UP
Category	Hearing Aid
Language	English