20 21
BTE operating instructions
Your hearing aids may come with two controls
that allow you to further adjust them – a rocker
switch and a push button.
Rocker switch
The rocker switch on your hearing aids
is a volume control.
Volume control
• Press up to increase volume
• Press down to decrease volume
As you change the volume level, your hearing
aids will beep.
Volume setting Beeps
Suggested volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps
Push button
The push button on your hearing
aids can be either a program
control, a volume control or a
combination of both.
Program control
If your push button is a program control, each
time you push the button, you will move to a new
hearing aid program.
Your hearing aids beep to indicate which program
you are in.
Program setting Beeps
Program 1 (e.g. automatic program) 1 beep
Program 2 (e.g. speech in noise) 2 beeps
Program 3 (e.g. easy-t/telephone) 3 beeps
Program 4 (e.g. music) 4 beeps
Easy-t/telephone short melody
DuoLink (if enabled) Opposite ear beeps
the same as side
being adjusted
Please see the front of this booklet for a listing
of your personalized programs.
To Next Page
Loading...
Need help?
General
