Unitron T Max series User Manual

10 11
Hearing aids with the rechargeable option
Clean every night
1) Clean your hearing aid charge
pads using the cleaning brush
provided and using a clean,
dry tissue.
2) Use the cleaning brush to
clean the slots in the charging base.
Do not use any liquids for cleaning.
Charge every night
1) Plug the power cord into the USB wall
adapter and into a power outlet, avoid a
laptop or computer. Lights on the charging
base will blink green once.
2) Place your hearing aids in the
charging slots every night.
The ear pieces should be on
the same side of the charger
as the power cable, as shown
in the picture.
3) When your hearing aids are
correctly placed, both lights will
blink green.
4) Check that the lights have
blinked green at least 5 times
to ensure the hearing aids are
charging.
5) Solid green lights mean your hearing aids are
fully charged.
Do not open the battery door as this will drain
the rechargeable battery.
Tips
• When not in use, keep your hearing aids in the
charger. They cannot overcharge.
• Do not place the hearing aids in the charger
if the charger is unplugged, this will drain the
batteries.
• If you receive a low battery warning from the
hearing aids, place them in the charging base
to charge or replace with traditional batteries.
• If the charging lights are red, remove the hearing
aids and refer to your Charging base guide.

Unitron T Max series Specifications

General

Brand	Unitron
Model	T Max series
Category	Hearing Aid
Language	English