Unitron uStream User Manual

4140
Deleting the pairing of Bluetooth
devices
If you encounter issues with one of the paired
devices, or if a device stops connecting to your
uStream, you may consider deleting the pairing
of devices to the uStream.
. Turn on your uStream while pressing the
volume up ( ) button.
. Release the volume up ( ) button only aer
ten seconds when the rapidly blue blinking
indicator light turns green.
. Also delete the uStream pairing entries on
your mobile phone before any re-pairing.
. Repeat the pairing procedure.
Deleting the pairing of Bluetooth devices
removes the ability to connect to these devices.
You will need to perform the pairing process
again if you wish to reconnect.
Troubleshooting guide
Cause Possible remedy
During Bluetooth pairing my other device is prompting
for a code, what do I have to enter?
The pairing code is
required for the initial
coupling of uStream with
your Bluetooth device
(pairing)
The uStream pairing code is
“0000” (four zeros)
I hear intermittency during audio streaming via uStream
The Bluetooth device
is too far away, or worn
in a back pocket (body
shielding)
Do not to exceed the
maximum distance 5-10m
(15-30 ) and keep Bluetooth
devices in front of you
uStream searches for
known devices for two
min aer switching on
Aer two minutes, uStream
will stop searching and the
intermittency will stop
A phone connected to
other devices, such as
a PC, may not be able
to continuously stream
music
When using your Bluetooth
phone as music player,
disconnect it from other
devices, such as PCs

Unitron uStream Specifications

General

Brand	Unitron
Model	uStream
Category	Hearing Aid
Language	English