Page 9
KP-900 OWNERS MANUAL
Setting LCD Contrast
You can adjust the contrast of the LCD screen using the LEFT and RIGHT
arrow keys once the LCD contrast screen has been selected (shown on the
previous page).
Setting LCD Color
Typically, the LCD color settings are controlled by the PC Editor. However,
by selecting USER instead of Software, then selecting the EDIT option, you
can adjust the color of the backlighting via this Setup page:
The current CONTRAST is
displayed here via a bar graph.
Adjust the CONTRAST setting with
the LEFT and RIGHT keys as shown
in the previous pages.
LCD
CONT
SAVE
EXIT
To exit without saving any
changes you have made, press
EXIT.
To save any changes you have
made, press SAVE.
To exit without saving any
changes you have made, press
EXIT.
To SAVE any changes you have
made, press SAVE.
LCD
R
G
B
SAVE
EXIT
The current Red, Green and
Blue settings are displayed here
as a bar graph. Simply, select the
color you’d like to adjust by
pressing the corresponding but-
ton, then use the LEFT & RIGHT
arrow keys as shown on the pre-
vious pages to adjust the level.
To Next Page
Loading...
Need help?
General
