Page 2
KP-900 OWNERS MANUAL
Optional RF “No Rules” Operation
In combination with a Complete Control RF Base Station, the KP-900 can
control your system without being in line-of-sight of the equipment. On the
wall or off, that means that you never need to point the KP-900.
The MSC-400, the MRF-350 or the MRF-260 RF base station are compatible
with the KP-900. All incorporate RF addressing. RF Addressing gives you the
ability to control equipment locations throughout your home, even if they are
concealed in other rooms or are behind closed doors.
4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of your
components. The Flashers relay commands
to components. The flashers plug in to the
base station’s rear flasher line outputs via
their 10 foot cables. Uniquely, URC base
stations can also connect to rear panel IR
Inputs via their adjustable IR Line Outputs.
3.The base station routes IR commands to the correct IR
Flasher.
1.The KP-900 sends radio waves
in every direction, so you don’t
have to point the remote any-
more!
2.The RFX-250 RF Sensor can be freely
positioned for optimal reception.
To Next Page
Loading...
Need help?
General
