Universal Remote Control R7 User Manual

MacroPower™
Imagine turning on your TV, your DVD player and your surround
sound receiver by pressing a single button on your R7! What would
normally take three remotes and three button pushes, the R7 can
accomplish with the press of one button. We call that MacroPower.
Any of the POWER ON or the SYSTEM OFF buttons can be
programmed for MacroPower control. To set up MacroPower to
these buttons, follow these easy steps:
STEP 1: To program MacroPower commands for the ON button,
press the ON button and the MUTE button together and hold them
down for about 3 seconds until one of the component button LED
lights turns on.
ON
Button
MUTE
Button
IMPORTANT: If you don't press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and you will need
to start over.
STEP 2: Press the component button you want to turn on and then the
ON button and repeat for all other components in the order you want
them to turn on. The LED light will blink once for each command.
21

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English