Universal Remote Control R7 User Manual

The R7 Remote Control
STEP 4: Press the component button vou want to set-up.
STEP 5: Point the R7 at the component vou want to program and
enter the 3-digit set-up code listed in the Code Tables. Use the
Number buttons 0-9 on the remote to enter the code. The AUX LED
light will blink once for each button pressed. Once vou enter the
correct code number, the component will turn off. If the component
does not turn off, press the next code numbers listed for your
component until it turns off.
STEP 6: Now, turn on the component and test the the VOLUME and
CHANNEL buttons (for TV) or the PLAY and STOP buttons (for VCR
and DVD) to make sure that they all work. If any of the functions does
not work properly, repeat Step 5 using the next code number listed for
your component until you find a perfect match.
STEP 7: Once you've found a correct code, you just have to save it.
Press the component button you just programmed, one more time to
store the code number. The component LED light will blink three
times to confirm that the code was successfully stored.
24

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English