Universal Remote Control R7 User Manual

SECTION 4: Erasing МасгоРомег Commands
STEP 1: For erasing MacroPower commands on the POWER ON or
SVSTEM OFF button, press and hold either the POWER ON or
SYSTEM OFF button and the MUTE button simultaneously
for 3 seconds until the component LED light turns on.
SYSTEM OFF
Button 772 =< Button
MUTE
Button
IMPORTANT: If you don't press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and you will need
to start over.
STEP 2: Press the CHANNEL UP button to erase and exit the Erase
mode. The component LED light will blink three times to confirm the
erasure.
31

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English