Information on disposal
and recycling
Pursuant to article 13 of Italian Legislative Decree 49 of 2014
“Implementation of the WEEE Directive 2012/19/EU on waste
electrical and electronic equipment”
The crossed-out wheelie bin symbol species that the
product was placed on the market after 13 August
2005 and that at the end of its useful life it should be
collected separately and not disposed of with other
waste. All appliances are made with recyclable metal
materials (stainless steel, iron, aluminium, galvanized
steel, copper, etc.) in percentages above 90% by
weight. Before disposal, ensure the appliance is unusable by
removing the power cable and all compartment or cavity closure
devices (where present). At the end of its useful life, the product
must be disposed of in such a way as to reduce any negative
impact on the environment and make ecient use of available
resources. Prefer prevention, preparation for reuse, recycling and
reclamation, and remember “the polluter pays”. Please remember
that illegal or incorrect disposal of the product incurs penalties, as
provided for by current legislation.
To Next Page
Loading...
Need help?
General