Utax P-4530DN User Manual

A-7
Appendix
3 Unscrew five screws at the back of the main controller board.
4 Pull out the main controller board gently.
5 Remove the memory module from its package. Aligning the cutouts
of the memory module with the matching keys of the socket, carefully
plug the memory module into the memory socket until it clicks in
place.
6 Push down the memory module to secure.
7 After you finish installing the memory modules, reinstall the main
controller board and fasten it with screws.
Removing a Memory Module
To remove a memory module, remove the main controller board, then carefully push out the two socket clamps. Ease the
memory module out of the socket to remove.
Main Controller Board
CAUTION Do not plug the memory module backwards.

Utax P-4530DN Specifications

General

Brand	Utax
Model	P-4530DN
Category	Printer
Language	English