Maintenance
5-4
Replacing the Toner Container
This section explains how to replace the toner containers. When
replacing the toner container of any color, always replace the waste toner
box at the same time. If this box is full, the printer may be damaged or
contaminated by the waste toner that may spill over the box.
IMPORTANT During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.
IMPORTANT We are not liable against any damages or problems
arising from the use of toner containers other than those designated
as original our toner containers. For optimum performance, it is also
recommended to use only the our toner containers which are
specifically intended for use in your country or region. If the toner
container for another destination is installed, the printer will stop
printing.
To replace the toner container, first make sure of the color of the toner
container requiring replacement. In this example, it is assumed that you
are replacing the cyan toner container.
1 Open the top cover (top tray).
2 Carefully remove the old toner container from the printer.
CAUTION Do not attempt to incinerate parts which contain
toner. Dangerous sparks may cause burns.
Note You do not have to turn printer power off before starting the
replacement. Any data that may be processing in the printer will
be deleted if you turn the printer power off.
To Next Page
Loading...
Need help?
General
