Utilitech 00P9016 User Manual

4
1
IMPORTANT SAFETY INFORMATION
 Never look directly into the light or shine in another person’s eyes.
 Do not expose the light to fire or intense heat.
 DO NOT DISPOSE OF BATTERY IN FIRE. BATTERY MAY EXPLODE OR LEAK.
 Non-rechargeable battery is not to be recharged.
 Do not immerse in water.
 Do not dispose the rechargeable battery in the regular waste system, waterway, stream or
any other body of water. Preserve the environment by disposing battery in accordance with
local, state, and federal regulations.
REPLACING THE BATTERY
The battery installation place is inside the mounting plate of
the light. Remove old battery and place new Li-ion
TNL-ITR18650 rechargeable battery.
For optimum performance, allow battery to charge in
full sunlight.
ASSEMBLY INSTRUCTIONS
1. Remove the mounting plate of the light by sliding in a
downward motion.
2. Using the mounting plate of the light as a template, mark
and drill the holes on the mounting surface in the desired
location with a 3/16 in. drill bit and insert plastic anchors
(CC).
.
2
Hardware Used
Plastic anchors x4
CC
CC
BATTERY

Utilitech 00P9016 Specifications

General

Brand	Utilitech
Model	00P9016
Category	Flood Light
Language	English