SHALLOW WELL
INSTALLATION
1.
Thread 1-1/4 in. male PVC adapter (not included)
into foot valve (not included). Hand tighten, then
tighten 1/4 turn with pipe wrench.
1
2. Using a 2-step PVC system (not included), attach
enough PVC pipe and couplings to the adapter to
equal the depth of the well, minus 5 ft.
2
3. Cement PVC pipe sections and couplings, then rmly
clamp the assembly with a pipe clamp (not included)
to prevent the assembly from sliding down into the
well.
3
5
Lowes.com
1-1/4 in. Male
PVC Adapter
Foot V
alve
1-1/4 in.
PVC Pipe