ENGLISH
19
DESCRIPTION OF THE CONTROL UNIT
The EASY digital control unit is an innovative V2
product that guarantees safety and reliability for the
automation of roller shutters.
• 230 Vac output for 1 single-phase motor
• 230 Vac output for flashing light or timed
courtesy light
• Input for key switch or pushbutton (START)
• Input for separate UP/DOWN commands
• Input for safety pushbutton (STOP)
• Input for safety photocell with automatic
operating test (PHOTO)
• Input for safety edge (mechanic or electronic)
with automatic operating test (EDGE)
• Input for fire emergency (FIRE)
• Monitoring the inputs using LED
• Operating logic and working times that can be
programmed using the programming key and
8 LEDs
• Possibility of operating in DEAD MAN mode
• Fitted 433.92 MHz radio receiver
• Possibility of saving 18 433.92 MHz
Personal Pass transmitters.
• Allows the total deletion of stored codes
EASY4
• Input for optical safety edge with 24V direct
current power supply and adjustment of the
power of the transmitter.
WARNING: use only FEEL optical safety
edges (see V2 catalogue)
TECHNICAL SPECIFICATIONS
230V models 120V models
Power supply 230V / 50Hz 120V / 60Hz
Max motor load 1100W 600W
Max accessories load 24V 3W 3W
Working temperature -20 ÷ +60 °C -20 ÷ +60 °C
Protection fuse F1 = 5A delayed F1 = 5A delayed
Dimensions 170 x 185 x 70 mm
Weight 800 g
Protection IP55
To Next Page
Loading...
Need help?
General
