System and product description
Operating and installation instructions 0020248967_00
11
3
You manually start the pairing mode for
three minutes by briefly pressing the sys-
tem button.
The product is suitable for all common
radiator valves with thread dimensions of
M30 x 1.5 mm. Using the adapter that is
included in the scope of delivery means
that the product can also be installed on
Danfoss RA, Danfoss RAV and Danfoss
RAVL radiator valves.
The product can automatically decrease
the target temperature during ventilation.
To precisely control the room temperature,
the optional ambiSENSE VR 51 room ther-
mostat can record the actual room tem-
perature centrally and transfer this to the
radiator thermostat.
To Next Page
Loading...
Need help?
General
