Val Controls I 24-BF Series User Manual

DHP-UM-013
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 4
18/58
is configured based on application requirement.
BLOCK_ERR
[Diagnostic]
6
Length: 2 bytes
Description:
This parameter reflects the error associated with
the hardware or software components associated
with a block. It is a bit string so that multiple
errors may be shown.
RS_STATE
[Process]
7
Length: 1 bytes
Value: Standby
Description:
State of the function block application state
machine
TEST_RW
[Process]
8
Read Write
Value_1
Value_2
Value_3
Value_4
Value_5
Value_6
Value_7
Value_8
Value_9
Value_10
Value_11
Value_12
Value_13
Value_14
Value_15
Description:
Read/Write Test parameters – used only for
conformance testing
DD_RESSOURCE
[Others]
9
Length: 32 bytes
Read Only
Value: “ “
Description: String identifying the tag of the
resource which contains the Device Description
for this resource.
MANUFAC_ID
[Diagnostic]
10
Value: “0x000105” – Microcyber Inc
Length: 4 bytes
Read Only
Description:
Manufacturer identification number – used by an
interface device to locate the DD file for the

Val Controls I 24-BF Series Specifications

General

Brand	Val Controls
Model	I 24-BF Series
Category	Valve Positioners
Language	English