55
Chapter 6 Maintenance
For optimal performance, MANUFACTURER recommends the working area be kept clean.
There are no specific cleaning requirements for the EzSensor HD beyond normal care and
attention for aesthetic appearances.
6.1 Visual Inspection
Like all electrical systems or device, EzSensor HD requires not only correct usage, but also
visual inspection prior to operation, as well as routine checks at regular intervals. These
precautions will help ensure that the Product operates accurately, safely, and efficiently.
Before use, the operator should check the Productfor any signs of physical damage or defects.
If something out of order is suspected, contact your local Product distributor for further
instructions on how to proceed.
6.2 Periodic Maintenance
Periodic maintenance should be performed as necessary and in accordance with monitored
frequency in the table below. Maintenance should consist of various checks performed by the
operator or by a qualified service technician.
●Check that all cables connected to the EzSensor HD are undamaged.
●Check for any external damage to the EzSensor HD that may compromise its ability to be
safely operated. If the EzSensor HD is defective, the sensor should be returned to the
manufacturer for repair.
●Arrange the sensor and the control box USB cable to prevent damage of the cable’s
rubber tube. They should not be stepped on nor bent and pressed under table legs.
A qualified service technician is a person authorized by Manufacturer or its
distributors.
To Next Page
Loading...
Need help?
General
