---
vax.co.uk
7
6
Assembling your multifunction cleaner (carpet washing)
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Add 40ml of Vax solution per 1
litre of water, unless otherwise
stated on the bottle.
Ensure the solution tube
is wrapped loosely around
the hose and extension
tubes. Secure in place
with the clips provided.
Operating the appliance (carpet washing mode)
Red button – power.
NOTE: For best results apply solution on the forward stroke and recover solution on the backward stroke.
Green button – activate pump.
Washing carpets
To put down water and solution
and turn the brushes on, push
rocker switch towards the
back of the wash head.
To suck up excess water push
the rocker switch to the front.
Remove solution tube from
under side of motor housing.
Fill tank with warm clean
water (max 40º C).
Press down on clips
to secure.
Attach solution tube.
1
2
2
1
1
2
Operation Operation
6151 Series Multivax User Guide [J779] Comp 21.09.12_User guide 21/09/2012 17:08 Page 6
To Next Page
Loading...
Need help?
General
