---
WARNING: To reduce the risk of personal injury, unplug your multifunction cleaner before performing
maintenance/troubleshooting checks.
Is there an accessory missing?
• Check the parts overview page to make sure the
attachment is supplied with your unit.
• If it is missing, please call our Vax Careline to
order a replacement: 0844 412 8455 or visit
vax.co.uk to order online.
Why won’t my multifunction cleaner put down
water/solution mix?
• Check there is water/solution mix in the clean
water tank.
• Ensure the solution tube on the underside of the
motor housing has been released and is in the
clean water tank.
• Check that the pump button on the carry handle
has been switched on.
• Ensure the foot pedal on the wash head
is positioned to the back of the wash head.
• Ensure the collar on the wash tool is
pushed forward.
Why won’t my multifunction cleaner recover water?
• The dirty water tank may be full.
• The wash tool might have an obstruction.
What do I do if an accessory/the unit has become
damaged or broken?
• We’re here to help. Simply call 0844 412 8455
or visit vax.co.uk
Why won’t the multifunction cleaner pick up in dry
mode?
• A filter may be clogged; refer to maintenance
section for cleaning instructions.
• The dust bag may be incorrectly fitted, check
assembling your machine in dry mode.
• The dust bag may be full, check and replace with
a new dust bag.
• Check for blockages in the
hose/floorheads/accessories.
Why is dust escaping from my multifunction
cleaner in dry mode?
• The filters may be incorrectly installed, check that
they are fitted correctly.
• The dust bag may be incorrectly fitted, check
assembling your machine in dry mode.
6151 Series Multivax User Guide [J779] Comp 21.09.12_User guide 21/09/2012 17:08 Page 10
To Next Page
Loading...
Need help?
General
