EasyManuals Logo
Home>Vax>Vacuum Cleaner>ACTION 602 U86-AN-BE

Vax ACTION 602 U86-AN-BE User Manual

Vax ACTION 602 U86-AN-BE
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Do’s
3 Turn o all controls on the vacuum
cleaner before disconnecting or
connecting the power cord.
3 Always make sure lters are in place
before use.
3 Always switch o the
vacuum cleaner before
disconnecting or connecting
the hose and accessories.
3 Keep all openings clear and free
from debris as this may aect the
airow/suction.
3 Always replace the fuse in the plug
with a British 13amp fuse. Always
protect the power cable from heated
surfaces and open ames.
3 Take extra care when positioning
and using the vacuum cleaner
on the stairs.
3 Use only CE approved 13amp
extension cords, non-approved
extension cords may overheat.
Care should be taken to
arrange the extension cord
as it can be a trip hazard.
3 Store your vacuum cleaner in a cool,
dry area. If lters have been cleaned
as per user guide instructions
ensure they are thoroughly dry
before storing away.
Don’ts
8 Don’t attempt to remove blockages
with sharp objects as this may cause
damage to your vacuum cleaner.
8 Don’t vacuum up hard or sharp
objects such as glass, nails, screws
or coins etc.
8 Don’t use the vacuum cleaner with
incorrect voltage as this may result
in damage or injury to the user.
The correct voltage is listed on the
ratings label.
Let’s talk safety

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax ACTION 602 U86-AN-BE and is the answer not in the manual?

Vax ACTION 602 U86-AN-BE Specifications

General IconGeneral
BrandVax
ModelACTION 602 U86-AN-BE
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals