Vax Agility V-123 User Manual

9
Vax Careline 0870 606 1248
cleaning upholstery / maintenance
Let go of trigger and pull tool over same area to pick up
dirty solution without putting down more solution.
Continue using dry strokes until you see only a little
solution coming up through the tool.
Do not make the upholstery too wet! Use no more than
two strokes while releasing solution. Always follow with
dry strokes - the more the better.
Listen carefully! When the motor sound changes (rises in
pitch), the recovery tank needs to be emptied.
NOTE: When water has reached the full line in the
recovery tank, the cleaner will NOT pick up any more
dirty solution.
Allow upholstery to dry. Avoid using upholstery until it is
dry. Increased air circulation (open doors, turn on fans, etc.)
will help upholstery dry thoroughly.
6. Maintenance
Cleaning the Nozzle
Unplug deep cleaner from electrical source.
Remove solution and recovery tanks to prevent possible
leaks.
Lift up on top of nozzle and slide off cleaner (Fig.6/1).
Wipe debris off nozzle and front of cleaner with a damp
cloth.
To replace nozzle, tilt cleaner back, raising front of cleaner
off floor. Slide nozzle up from bottom of cleaner (Fig.6/2).
Press on upper portion of nozzle to snap in place.
Cleaning the Brushes
Unplug deep cleaner from electrical source.
R
emo
v
e solution and r
ec
overy tanks to prevent possible
leaks.
Tilt cleaner back so handle r
ests on the floor.
Pull brush assembly firmly to remove (Fig.6/3).
Fig.6/1
Fig.6/2
Fig.5/2
A
Vax V-123 User Guide.qxd 10/8/07 15:43 Page 9

Vax Agility V-123 Specifications

General

Brand	Vax
Model	Agility V-123
Category	Vacuum Cleaner
Language	English