EasyManuals Logo
Home>Vax>Vacuum Cleaner>Blade 5

Vax Blade 5 User Manual

Vax Blade 5
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12
WARNING: Always remove the battery before carrying out any maintenance or troubleshooting.
CAUTION: Don’t over fill the dirt container to avoid blocking the air flow through the machine.
For best cleaning results, empty the dirt container after every use. Filters should be tapped over a
bin every 4-6 uses to remove dirt and debris and washed every 3 months. Filters should be replaced
every 6-9 months depending on the level of use.
1. Squeeze the latch on the dirt
container to release.
2. Tilt and lift to remove from the
handheld.
1. Squeeze the latch on the dirt
container to release.
2. Tilt and lift to remove from the
handheld.
Hold the dirt container over a bin and
press the dirt release button to allow
dirt and debris to fall out.
To close, push the dirt release door until
it clicks into place.
To assemble align the white arrows.
Rotate the dirt container onto the
handheld. Push until it clicks into place.
When correctly fitted all 3 connection
points will be aligned and will sit flush.
1
1
2
2
Cleaning and maintenance
Removing and refitting the dirt container
Emptying the dirt container

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax Blade 5 and is the answer not in the manual?

Vax Blade 5 Specifications

General IconGeneral
BrandVax
ModelBlade 5
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals