EasyManuals Logo
Home>Vax>Steam Cleaner>Grime Pro

Vax Grime Pro User Manual

Vax Grime Pro
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Getting Started
Operating your steam cleaner
4
Squeeze tabs on side of detergent tank
to slide tank out of steamer.
Remove cap from detergent tank and fill with
maximum 120ml of Vax detergent. Replace cap
firmly and slide solution tank back into steamer
NOTE: For best results, fill with 120ml of detergent.
Alternatively dilute the mixture with 50ml detergent
and 70ml water
NOTE: Whilst in use do not recline unit more than 45 degrees.
Place steamer on a level surface and ensure
steamer is switched off and is cool. To remove
lid push down and twist anti clockwise.
Ensure the lid is securely fastened by
turning in a clockwise direction.
Slowly pour water into water tank.
Do not overfill the water tank. Allow
space to be left at the top.
Fill measuring jug with maximum 300ml.
C
AUTION: Do not use hot or boiling water to fill water compartment. Do not open the water tank lid when using the steamer. Your steamer is
pressurised, do not completely remove the lid when tank is hot. Fill tank only when cool. Do not overfill the water or detergent tank
compartments.
Filling the detergent tank
Filling the water tank
I
MPORTANT: After use, switch off the machine, compress the trigger to release all remaining steam. Allow machine to cool for a
minimum of 10 minutes before refilling or storing.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax Grime Pro and is the answer not in the manual?

Vax Grime Pro Specifications

General IconGeneral
BrandVax
ModelGrime Pro
CategorySteam Cleaner
LanguageEnglish

Related product manuals