If you wish to clean with steam alone,
simply turn the Detergent Control Dial
to OFF.
How To Use
vax.co.uk 5
After you plug in and switch on your
machine you will see a blue LED which
indicates water is being heated. After 5
minutes a green LED will indicate that your
steamer is ready to use.
If you wish to clean using Vax Solution,
simply turn the Detergent Control Dial
to the desired setting. Now, when
pressing the Steam Trigger, the steam
cleaner will release the amount of
solution that is indicated on the
Detergent Control Dial as well as
steam.
Plug in steamer and switch on
at the mains.
Operating your steamer
Depress the trigger to release
steam/steam+detergent from the nozzle.
To Next Page
Loading...
Need help?
General
