EasyManuals Logo
Home>Vax>Vacuum Cleaner>Platinum PowerMax ECB1SPV1

Vax Platinum PowerMax ECB1SPV1 User Manual

Vax Platinum PowerMax ECB1SPV1
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
What to do if it goes wrong
IMPORTANT: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
SolutionProblem
The plug may not be fully pushed into the electrical socket.
Check if the fuse in the plug needs replacing. Always replace
with a British 13amp fuse.
Why won’t the carpet
washer turn on?
Check the contents on the box to make sure the part is
denitely included with your washer.
There is an
accessory missing
Make sure the clean water tank is tted securely.
Go to ‘using your machine’.
Wash/Rinse dial has been set to Rinse, set dial to wash to
dispense solution.
The clean water tank valve may be stuck, hold the clean water tank over
the sink and press the valve underneath to release.
Squeeze the trigger on the handle to release solution and water mix.
The water/solution tank is empty. Rell the tank.
Go to ‘Using your machine’.
Why won’t the
solution/clean
water dispense?
The oat in the dirty water tank may have been activated.
Empty the dirty water tank wait for the oat to settle before re-starting
your carpet washer.
Check the SpinScrub and brushbar for blockages and clear.
The dirty water tank may not be tted correctly, also make sure the lid
is pushed down securely.
Check the nozzle for blockages and clear.
Check the nozzle is correctly tted. Go to ‘Taking care of your machine’.
Check the lter screen located in the dirty water tank for dirt and debris.
Go to 'Emptying and cleaning the dirty water tank'.
Why won’t the
carpet washer
pick up?
The brushes will only spin when the carpet washer is reclined.
Check the SpinScrub and brushbar for blockages and clear.
Go to 'Removing and cleaning the brushbar / SpinScrub brushes'.
Check for damage to the brushbar and the spindle on the back of the
SpinScrub brush.
Why won’t the
brushes spin?

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax Platinum PowerMax ECB1SPV1 and is the answer not in the manual?

Vax Platinum PowerMax ECB1SPV1 Specifications

General IconGeneral
StyleUpright
Color-
Total Power1200 W
Suction Power-
Dust Bin Capacity2.9 L
Power Controls-
Operating Radius-
Cord Length9 m
Hose Length4.6 m
Automatic Cord Rewind-
Exhaust Filter-
Motor Protection Filter-
Park system-
?leaning Area-
Noise Level-
Cleaning ModesSpot
FeaturesTelescopic suction wand
Brushes and AccessoriesDusting brush with synthetic bristles
Power Consumption-
Battery Life-
Battery Capacity-
Weight and Dimensions IconWeight and Dimensions
Depth410 mm
Height1100 mm
Width340 mm
Net Weight9.6 kg

Related product manuals