11
IMPORTANT: Optional step. To extract any remaining solution from your carpet, rinse your carpets with water only.
Do not over saturate your carpet.
USING YOUR MACHINE
Rinsing the carpet
To rinse, pull up the
solution tank and lift to
remove.
For best results apply
water on the forward
stroke and release the
trigger to pick up water
on the backward stroke.
Follow with a slow
additional dry stroke
without the trigger
pressed for a dryer finish.
Twist the clean water
tank cap anti clockwise
and remove.
Pull and lift to remove the
clean water tank.
Fill the clean water tank
with warm water (max
40�C). Replace the cap and
twist clockwise to tighten.
To replace the clean water
tank, align the back of the
clean water tank with the
body of the machine. Slide
it down and press firmly
into place.
40°C
MAX
To Next Page
Loading...
Need help?
General
