EasyManuals Logo
Home>Vax>Steam Cleaner>SCSMV1SG

Vax SCSMV1SG User Manual

Vax SCSMV1SG
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
CAUTION: Never use the Squeegee on cold glass/windows as it may cause damage.
Stretch utility pad over
Utility Head.
Push Utility Head and pad into steamer until
secure. It will not lock into place. Pull test
to check it is secure.
Small tools can be attached via the
Concentration Nozzle. Push together to
click into position and secure. Push hard
and ensure click is heard. Add pull test on
brushes to check tools are secure.
Push Utility Head and Squeegee into steamer until
secure. It will not lock into place but should sit rmly
against steamer.
Attaching accessories
Attaching brushes Attaching Utility Head
Attaching Squeegee
Align the tab on the Squeegee with the Utility
Head and utility pad, push together to lock into
position. Please note that the utility pad must
be attached to the Utility Head before the
Squeegee can be tted on. Squeegee will
not connect without the pad on rst.
To remove, pull Squeegee
down on tab.
Using the machine as a handheld
IMPORTANT: The handheld is to be used with water only, putting detergent into the water tank can cause damage.
Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.
Push handle release button and lift
handle to remove. The collar should be
gripped with one hand when releasing
the handle with the other hand.
Push Concentration Nozzle into steamer
until it clicks into place.
Press accessory release button and lift
steamer to release oorhead.
Plug into mains, turn the dial to ‘on’
position. The red light will illuminate to
indicate power on.
To produce steam squeeze the trigger in short bursts. Don’t hold the trigger
continuously to prevent over wetting. Allow 30 seconds for steamer to
warm up. No sound will be heard until trigger is pressed. No steam will be
visible until after 30 seconds.
Twist the steam control dial to
desired setting.
Using your machine Using your machine
TIP
After attaching your
chosen accessory
gently pull to make
sure it’s locked into
place or feels secure.
Always switch OFF the
steamer before attaching
the concentration tool
and accessories.
CAUTION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax SCSMV1SG and is the answer not in the manual?

Vax SCSMV1SG Specifications

General IconGeneral
BrandVax
ModelSCSMV1SG
CategorySteam Cleaner
LanguageEnglish

Related product manuals