EasyManuals Logo
Home>Vertiv>Control Unit>NetSure Series

Vertiv NetSure Series User Manual

Vertiv NetSure Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Vertiv | NetSure Rectifier Module User Manual (UM1R483500e) | Rev. R
12
Regulation:
a) Output Voltage Tolerance:
Output voltage tolerance:
< ± 0.2 % 25 A load +15 °C to +35 °C
< ± 0.5 % 25 A load -5 °C to +55 °C
Static regulation, including input voltage variation and temperature variation:
< ± 0.5 % 5 % to 100 % load +15 °C to +35 °C
< ± 1 % 5 % to 100 % load -5 °C to +55 °C
Uin = 176 VAC to 290 VAC for R48-3200 and R48-3200e, 176 VAC to 305 VAC for R48-3500e,
185 VAC to 305 VAC for R48-4000e, f = 45 Hz to 65 Hz
Output voltage decreases with increased output current.
Overshoot of output voltage at startup ±1 %.
b) Dynamic Response Characteristic (at rated input and output voltage):
Response time 200 us and overshoot ≤ 5 % for load changes at
50 % - 25 % - 50 % and 50 % - 75 % - 50 %.
Overshoot or undershoot ≤ 5 % and output recovers within ±1 % of regulation band in ≤ 4 ms for load
changes at 10 % - 90 % and 90 % - 10 %. (Telcordia GR-947.)
Filtering (with or without battery):
a) Voice Band Noise: Complies with Telcordia GR-947-CORE.
1. R48-3200, R48-3200e, R48-3500e: Output noise according to Telcordia GR-947-CORE: < 32
dBrnC between 180 VAC ~ 290 VAC input and 10 % to 100 % load (output voltage > 42 V, for
any application with > 1 rectifier).
2. R48-4000e: Output noise according to Telcordia GR-947-CORE: < 38 dBrnC between 180
VAC ~ 290 VAC input and 20 % to 70 % load (output voltage > 42 V, for any application with > 1
rectifier).
3. R48-3200, R48-3200e, R48-3500e: Psophometric noise is ≤ 1 mV between 180 VAC ~ 290 VAC
input and 10 % to 100 % load (output voltage > 42 V) and 16.66 Hz to 6000 Hz. (for any
application with > 1 rectifier).
4. R48-4000e: Psophometric noise is < 2 mV between 180 VAC ~ 290 VAC input and 20 % to
70 % load (output voltage > 42 V) and 16.66 Hz to 6000 Hz. (for any application with > 1
rectifier).
b) Wide Band Noise: Complies with Telcordia GR-947-CORE.
1. Typically 130 millivolt peak-to-peak. Does not exceed 250 millivolt peak-to-peak.
2. Typically 13 millivolts rms. Does not exceed 30 millivolt rms.
Output Discharge: The output capacitors automatically discharge when the rectifier is disconnected
from the batteries and AC is turned OFF. Time constant is less than 1 minute.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vertiv NetSure Series and is the answer not in the manual?

Vertiv NetSure Series Specifications

General IconGeneral
BrandVertiv
ModelNetSure Series
CategoryControl Unit
LanguageEnglish

Related product manuals