To Next Page

To Previous Page

TRANSPORTING

TRANSPORT SAFETY

1. Comply with state and local laws governing safety and transporting of machinery on public

roads.

2. Check that all the lights, reflectors and other lighting requirements are installed and in good

working condition.

3. Do not exceed a safe travel speed. Slow down for rough terrain and cornering..

4. Fold up and secure feed hopper before moving or transporting.

5. Be sure the trailer is hitched positively to the towing vehicle and a retainer is used through the

mounting pins.

6. Do not drink and drive.

7. Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including

narrow bridges, intersections, etc. Watch for traffic when operating near or crossing roadways.

8. Never allow riders on the machine.

a. When transporting the machine, review and follow these instructions:

b. Clear the area of bystanders, especially small children.

c. Check that all the lights and reflectors required by the highway authorities are in place, clean

and working.

d. Insure that the machine is securely attached to the tractor with a retainer through the

mounting pins.

e. Do not allow riders.

f. Never exceed a safe travel speed. Slow down when encountering rough road conditions and

cornering.

g. Do not drink and drive.

h. Raise and secure the feed hopper before transporting.

i. Turn the discharge hood and point toward the rotor to reduce the width of the machine.

STORAGE

OPERATING SAFETY

1. Store the unit in an area away from human activity.

2. Do not permit children to play on or around the stored machine.

3. Store the unit in a dry, level area. Support the frame with planks if required.

PLACING IN STORAGE

After the season's use or when the machine will not be used for a period of time, completely

inspect all major systems of the 3 Point Hitch Wood Chipper. Replace or repair any worn or

damaged components to prevent any unnecessary down time at the beginning of the next season.

Follow this procedure before storing:

1. Remove all material from the machine.

Victory BX52S User Manual

Questions and Answers: