2
SAFETY INSTRUCTIONS
Before operating the Wood Chipper
read the following safety
instructions. Failure to comply with these warnings may result in serious
injury or death.
READ AND FOLLOW THE READ AND FOLLOW THE ESPECIALLY IN THE SAFETY
SECTION. FAILURE TO DO SO CAN RESULT IN SERIOUS INJURY OR DEATH.
SIGNAL WORDS: The signal words DANGER, WARNING and CAUTION are used with the safety
messages in this manual and with each safety sign. They are defined as follows:
DANGER: Indicates an immediate hazardous situation that, if not avoided, could result in serious injury or
death. This signal word is to be limited to the most extreme situations typically for machine components that,
for functional purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or
death, and includes hazards that are exposed when guards are removed. It may also be used to alert
against unsafe practices.
CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe practice.
EQUIPMENT SAFETY GUIDELINES
Safety of the operator and bystanders is one of the main concerns in designing and developing a wood
chipper. However, every year accidents occur which could have been avoided by a few seconds of
thought and a more careful approach to handling equipment. You, the operator, can avoid many
accidents by observing the following precautions and insist those working with you, or for you, follow
them.
In order to provide a better view, certain photographs or illustrations in this manual may show an
assembly with a safety shield removed. However, equipment should never be operated in this condition.
Keep all shields in place. If shield removal becomes necessary for repairs, replace the shield prior to
use.
Replace any safety sign that is not readable or missing. Location of such safety signs are indicated in
this manual.
To Next Page
Loading...
Need help?
General
