TOPSIDE CONTROL
OPERATION INSTRUCTIONS
It is very important to make sure that the spa is filled
at least 3/4 way up the skimmer opening. Make sure the gate
valves are in the open or up position.
WARNING: Do not run spa with gate valves closed or run pump
with no water circulating in spa for long periods. Damage could occur
to the spa equipment.
Warning! / Shock Hazard! / No User Serviceable Parts.
Do not attempt service of this control system. Contact
your dealer or service organization for assistance.
Follow all owner’s manual power connection instruc-
tions. Installation must be performed by a licensed elec-
trician and all grounding connections must be properly
installed.
10
Use the Accompanying QR code for instructions that best
matches the control panel on your spa
OPTIONAL Touchscreen
Controller
Installed when purchased
on spas with BP Power Systems
USE QR on left or go to:
http://www.vikingspas.com/ftp/spatouch_usergide.pdf
Controller
Installed on
V
iking 1, Viking 2, Aurora P, Aurora P+,
R
oyale P, Royale P+, Regal P, Regal P+
USE QR on left or go to:
http://www.vikingspas.com/ftp/tp500userguide.pdf
Controller
Installed on
All other spas
USE QR on left or go to:
http://www.vikingspas.com/ftp/240viking_usergide.pdf
To Next Page
Loading...
Need help?
General
