Vision 16 Series User Manual

Riser Block Extensions 27
© 2013 Vision Engraving & Routing Systems
10 Collets and Diamond Drag Adapter
Spindle Options
Increase your profits and engraving quality with the split collet spindle. Designed to be extremely
accurate and durable, the collet spindle is simple to use. This collet retracts around the cutter gripping it
at the bottom, while firmly holding on the top. By holding the cutter in two places the cutter is virtually
vibration-free and nearly eliminates play and runout. The split collet spindle can engrave with excellent
clarity and resolution while averaging a longer product life than any other spindle.
The collet spindle accepts both top loaded and bottom loaded cutters, including 2” short shank cutters
such as drill bits, router bits, dremel tools etc. Should you ever want your split collet spindle to act like a
standard spindle, simply install our solid collet in the spindle (available separately).
Diamond Drag Adapters
Using your plastic cutters to engrave metal can seriously damage them. There is a better option; Vision
offers high-quality diamond drag adapters. Don’t burn out your bearings on a job that can be done just
as easily as cutting plastic. The diamond drag adapter engraves virtually all-metallic surfaces, at high
resolution and high speed. The results achieved with a diamond drag adapter can be even more
amazing when used with double and triple-line fonts.

Vision 16 Series Specifications

General

Brand	Vision
Model	16 Series
Category	Engraver
Language	English