EasyManuals Logo
Home>Visonic>Security Sensors>NEXT K9-85 PG2

Visonic NEXT K9-85 PG2 User Manual

Visonic NEXT K9-85 PG2
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
D-302413 NEXT PG2, NEXT K9-85 PG2 Installation Instructions 1
NEXT PG2 /
NEXT K9-85 PG2
PowerG, Wireless, PIR /Pet Tolerant Motion Detector
Installation Instructions
1. INTRODUCTION
The Next PG2 and Next K9-85 PG2 are 2-way, microprocessor-controlled, wireless digital PIR detectors.
The detectors features are as follows:
For use with all PowerMaster® control panels (version 10 and higher).
Combined Fresnel and cylindrical optics, up to 15 meters (49 ft).
The Next PG2 includes wall creep zone protection.
In Next PG2 and Next K9-85 PG2, Target Specific Imaging™ (TSI) technology is used for distinction
between human beings and pets weighing up to 38 kg (85lb).
Includes a fully supervised PowerG transceiver.
The advanced True Motion Recognitionalgorithm (patented) allows distinguishing between the true motion
of an intruder and any other disturbances which may cause false alarms.
Sophisticated frequency domain digital signal processing.
Built-in link quality indicators; no need for the installer to physically approach the control panel thus making
installation faster and easier.
B
A
A. LED
B. Lens
Figure 1: External View
No vertical adjustment is needed.
Motion event counter determines whether 1 or 2 consecutive motion events will trigger an alarm.
Automatic termination of walk-test after 15 minutes.
Microprocessor-controlled temperature compensation.
Sealed chamber protects the optical system.
Front cover and back tamper switches, for improved tamper protection.
White light protection.
Notes: 1. The pet immunity feature was not evaluated by UL.
2. For CE installations, the pet immunity was not evaluated by DNV.
2. INSTALLATION
2.1 General Guidance (see Fig. 2)
1. Keep away from heat sources.
2. Do not expose to air drafts.
3. Do not install outdoors.
4. Avoid direct sunshine.
5. Keep wiring away from power cables.
6. Do not install behind partitions.
7. Mount on solid stable surface.
8. Installed in accordance with NEC, NFPA 70.
9. Installed in accordance with UL 681, Standard for
Installations and Classifications of burglar and Holdup
Alarm Systems.
1 2 3
4 5 6
7
Important! The Next K9-85 PG2 detector is tolerant to 38 kg (85 lb) animals moving on the floor or climbing on
furniture as long as the activity takes place below 1 m (3 ft). Above the 1 m (3 ft) height limit, the detector is tolerant
to 19 kg (42 lb) pets, but the pet immunity will decrease as the pet gets closer to the detector. It is therefore
recommended to select a mounting location that minimizes potential close proximity of animals.
WARNING! To comply with FCC and IC RF exposure compliance requirements, the PIR detector should be located at a distance of at least 20
cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any
other antenna or transmitter

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Visonic NEXT K9-85 PG2 and is the answer not in the manual?

Visonic NEXT K9-85 PG2 Specifications

General IconGeneral
BrandVisonic
ModelNEXT K9-85 PG2
CategorySecurity Sensors
LanguageEnglish

Related product manuals