Vizio E50-E3 User Manual

English - 12
1
Installing the Display Stands
Remove any plastic lm from the Home Theater
Display and stands.
Place the Display screen-down on a clean, at
surface. To prevent scratches or damage to
the screen, place the Display on a soft surface
such as a carpet, rug, or blanket, and avoid any
sharp edges.
Make sure the top and bottom edges of the screen
are being supported by the surface to avoid damage.
It is recommended that two people take
part in the stand installation.
P
Î

Vizio E50-E3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	49.5 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Supported video modes	2160p
Contrast ratio (dynamic)	200000:1
Motion interpolation technology	-
3D	No
Battery type	AAA
Number of batteries supported	2
Processor cores	8
Video formats supported	H.265, VP9
Wi-Fi standards	Wi-Fi 5 (802.11ac)
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
RMS rated power	20 W
Power consumption (standby)	0.5 W
Power consumption (typical)	100 W
Product color	Black
Panel mounting interface	200 x 200 mm
Remote control type	XRT135
Package depth	168.91 mm
Package width	1224.03 mm
Package height	785.11 mm
Package weight	17700 g

Weight and Dimensions

Depth (with stand)	238.76 mm
Width (with stand)	1127.76 mm
Height (with stand)	716.28 mm
Weight (with stand)	12500 g
Depth (without stand)	88.9 mm
Height (without stand)	657.86 mm
Weight (without stand)	12200 g