Vizio E50-E3 User Manual

English - 18
To pair your mobile device:
1. Launch the VIZIO SmartCast app on your
mobile device and press the Power button on
the basic remote or on the back of the Display
to power on the Display.
2. From the VIZIO SmartCast app, tap on the
button in the top left corner. The side menu
is displayed.
3. Tap Setup a new Device from the list of
options.
The setup wizard appears and describes how to pair
your mobile device with the E-Series Display.
Hold your mobile device close to the VIZIO logo on
the bottom right corner of the Display for at least 5
seconds to pair it with the E-Series Display. Follow the
on screen instructions to nish the setup wizard.
Pairing your mobile device

Vizio E50-E3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	49.5 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Supported video modes	2160p
Contrast ratio (dynamic)	200000:1
Motion interpolation technology	-
3D	No
Battery type	AAA
Number of batteries supported	2
Processor cores	8
Video formats supported	H.265, VP9
Wi-Fi standards	Wi-Fi 5 (802.11ac)
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
RMS rated power	20 W
Power consumption (standby)	0.5 W
Power consumption (typical)	100 W
Product color	Black
Panel mounting interface	200 x 200 mm
Remote control type	XRT135
Package depth	168.91 mm
Package width	1224.03 mm
Package height	785.11 mm
Package weight	17700 g

Weight and Dimensions

Depth (with stand)	238.76 mm
Width (with stand)	1127.76 mm
Height (with stand)	716.28 mm
Weight (with stand)	12500 g
Depth (without stand)	88.9 mm
Height (without stand)	657.86 mm
Weight (without stand)	12200 g